:  Jul 13, 2004



. Disconnect the battery ground cable.

. Drain the engine oil.

.
  : Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open connections to prevent contamination.

Remove the oil temperature sensor.
  Disconnect the engine oil temperature sensor electrical connector.
  Position a container to collect the oil spillage.
  Remove and discard the O-ring seal.




. :
  Lubricate new seals with clean engine oil.

Install the oil temperature sensor.
  Clean the component mating faces.
  Install a new O-ring seal.
  Tighten the oil temperature sensor to 20 Nm (15 lb.ft).
  Connect the engine oil temperature sensor electrical connector.

. Fill the engine with oil.

. Connect the battery ground cable.